Saturday, June 10, 2017

Bookmark and Share

NiSi "Natural Night Filter" Tests & Review

Gallery (36 images): NiSi Natural Night Filter Tests

[Updated June 10, 2017: post now has full review and gallery]

I recently purchased a NiSi Natural Night Filter, a filter designed to block certain wavelengths of light, namely those produced by sodium vapour and mercury vapour lamps. Sodium vapour city streetlights are what cause night shots in cities to have such a dominant yellow/orange colour cast. In the animated GIF image above, you can see what a dramatic difference the filter makes! Also check out the linked gallery above for some extensive comparisons.

Not yet having an existing drop-in filter holder, I also bought NiSi's filter holder system kit. I have not tried any of NiSi's other extensive set of filters, such as graduated NDs or the like, so my review is rather specific.  For simplicity sake, I will refer to this filter as the NNF from now on in the following review...

Saturday, May 20, 2017

Bookmark and Share

UBC Botanical Gardens w/Fujinon XF50mm f/2R WR

Gallery (30 images): 2017/05 - UBC Botanical Gardens

A wonderful day in the sun, shooting out at the UBC Botanical Gardens. All photos were taken with my new Fujinon XF 50mm f/2R WR lens. It focuses fairly closely on its own, without extension tubes and all the shots in the gallery were taken with just the lens itself.

Originally, I was going to write a review on this lens in conjunction with this posting, but the review will follow in the next few days and I will link to it from here, as well as from my other 50mm f/2 gallery, 2017 Spring has Finally Sprung! There will be one more gallery with some more shots from the 50mm to follow then as well.

Saturday, April 29, 2017

Bookmark and Share

2017 Spring has Finally Sprung!

Gallery (25 images): 2017 Spring has Finally Sprung!

After a long lazy lull in my blogging, I am finally back and plan on trying to post on a more regular basis! I have a backlog of work that I am going through, from previous years of trips, to new lens tests, filter tests, and more. In addition, I was down in southern California for a week to photograph the incredible wildflower "super bloom" they had, and another posting will come with photos from that trip too.

So... we have had many months of abysmal weather here in Vancouver, Canada. First there were months of cold weather with surprising amounts of snowfall that stuck around for weeks and weeks. Then we had a month plus of continuous rainy days, with seldom a hint of any sun. It has been a depressing few months, weather-wise, which probably contributed to my lack enthusiasm. In any case, recently the weather has warmed up and we've had a few fantastically beautiful days, so I've finally got out and started shooting again.

The above gallery are simply shots from a nice evening walk home from work the other day. Flowers and trees are in full bloom, and there were many great photo ops, just walking along one of my usual routes. All the photos were taken with Fujifilm's superb new XF 50mm f/2R WR lens, a light, compact prime that is weather and dust resistant, focuses quite close, is very sharp and renders out-of-focus backgrounds with nice smooth bokeh.

Notably, this is also one of the first galleries in a very long time where I have only relied on Adobe Lightroom for processing my Fujifilm X-Trans sensor raw files. Recent updates to Adobe's Creative Cloud apps have finally allowed Lightroom and Adobe Camera Raw to very nearly catch up to the image quality available from third-party raw converters like PhotoNinja or Iridient Developer. While those raw converters still have Adobe beat for the absolute best low-ISO fine detail rendition, the differences are now slight enough that I no longer feel it necessary to step away from Lightroom unless I am making really big prints. So, the shots in this gallery were 100% Lightroom-only processed. Enjoy!

Sunday, November 20, 2016

Bookmark and Share

2016 Rockies Trip - Selected 70

Moraine Lake - Gallery: 2016 Rockies Trip - Selected 70

In September, I went on a road trip with my dad and Franziska. We traveled through the Kootenays, then the Rockies up through Banff and Jasper National Parks, up to Prince George and down to Wells and Barkerville, then back home via the Fraser Canyon. These are 70 selected images from the trip, some highlights of the many picturesque spots we visited.

Saturday, August 27, 2016

Bookmark and Share

Infrared with a modified Fujifilm X-E2

Gallery (30 images): Infrared modified Fujifilm X-E2

Over the years I've had several digital cameras dedicated to IR photography, first starting back in 2000 (if memory serves) with a Nikon Coolpix 800, then followed by an Olympus C4040 and then a Nikon Coolpix 5400. With those cameras, I used deep IR filters on otherwise stock cameras and shutter speeds were long enough in full sunlight, that I often had to use a tripod. I never used those cameras for colour photography since I felt that their image quality wasn't good enough, however with the IR grain and glow added in post, they seemed to mostly suffice for my B&W IR ambitions. Back then, I was shooting medium format transparency film with a Pentax 67II, my main camera at the time.

Then, after buying a Canon EOS-30D in 2006, I decided to have my very first digital SLR that I had bought in 2004, an EOS-20D, converted to a dedicated IR camera, letting LifePixel do the modification with a standard 720nm bandpass IR filter. I had that camera for many years, finally selling it when I started to use Panasonic Micro-4/3 bodies. In 2012, when I was shooting with a GH2, I decided to buy a Panasonic GF2 body and immediately had it converted to shoot IR (720nm as well), and used LifePixel once again. With a standard DSLR, one has to worry that IR light doesn't focus in the same plane as visible light, leading to focus errors when the visible light is used either by the DSLR's AF sensor, or by you if manually focusing via the camera's focusing screen. This is why many older lenses had an IR offset dot on their focusing scale, so you could manually shift the focus to compensate. Well, with a mirrorless camera like the GF2, the main image sensor is being used to focus, and since the IR filter is, of course, in front of the image sensor, you get perfectly accurate AF, as well as being able to see the IR effect through the EVF or back LCD screen. Overall, this made shooting IR much more pleasant and accurate compared to a modified DLSR!

Saturday, August 6, 2016

Bookmark and Share

Southwest 2016: Lime ruins, Danger Pt. and Succor Creek

Lime, OR - Abandoned Cement Plant Ruins (click for full gallery)

In mid-June, I was off on another road-trip to the US Southwest, as detailed in my previous blog post, where I talk about shooting with my new Fujifilm X-Pro2 and compared raw conversions from PhotoNinja with Lightroom.

The gallery above has images from the first two days of shooting, starting with the graffiti encrusted ruins of an abandoned concrete plant in Lime, Oregon. As with other recent trip galleries, there are GPS links on the thumbnails of each image (the globe icon at the top left of each slide), so you can see where the shot was taken, give or take a few dozen meters usually. On the first day of shooting, I accidentally had left my camera in JPEG only (was testing how many JPEG-only shots per card for a customer at work, just before I left) and didn't notice until the download to my laptop that evening... D'oh! Luckily the overcast shots generally presented only minimal dynamic range challenges so the JPEGs are fine. Quickly switched back to RAW+JPEG that evening after I noticed though!

The next day, a few hours were spent hiking around the fascinating rock formations near the Danger Point cliffs, south of Westfall, Oregon. Then it was off to find a camp site at the Succor Creek State Natural Area in southeast Oregon. These BLM lands are filled with some amazing rock formations, cliffs, canyons and even "painted desert" areas.

Click to see all the blog postings from my 2016 June Southwest Trip...

Saturday, July 23, 2016

Bookmark and Share

Southwest trip and X-Pro2 raw processing...

Lightning over White Sands, New Mexico

I am back from a three week road-trip to the Southwestern US. This time, it was a trip through Washington, Oregon, Idaho, Nevada, Utah, Colorado, New Mexico and back, for a total of 8,945 km of driving. The furthest south was White Sands, New Mexico, where the above photo was taken at dusk. Actually, the shot is looking towards White Sands from Oliver Lee State Park to the east.

Not only is this blog posting about sharing a few trip images, prior to getting some full galleries posted, but also to discuss X-Trans sensor raw conversions, specifically how the latest Adobe Lightroom CC compares to PhotoNinja with images from my Fujifilm X-Pro2. While Adobe has significantly improved their Fujifilm X-Trans raw processing, eliminating many of the original obvious drawbacks, such as badly smeared colour details, strange blurs and/or outlining along high colour-contrast edges and so on, there are still some weaknesses. One is that fine texture details with strong colour contrast still seem to lack definition (nowhere near as badly smeared as before though) and that detail in shadows, and not just ones that have been dramatically pulled up in post, often seems to look muddy and rather blurry. By the way, you can click on any of the shots in this posting to bring up a much larger version. Just click the back button in browser to return to the post after...

Also, if you just want to see images from the trip and don't care about raw processing, click to see all the blog postings from my 2016 June Southwest Trip...

Monday, May 23, 2016

Bookmark and Share

Vancouver Convention Centre - Private Fireworks...

I was informed of some private, special-event fireworks that were going to take place in front of the Vancouver Convention Centre, so after promising to keep it quiet and only tell a few close friends, I was given the date and time. I was lucky to have some nice evening light with a fading blue sky, wind to keep the area smoke free for the 10 minute show, and some darker clouds behind the fireworks for contrast. It was bright enough still that I couldn't do my usual long exposure blocking technique for photographing the fireworks, but the balanced light of the sky, the convention centre lights, and the fireworks of course, all made for some nice images in the end...

Sunday, May 8, 2016

Bookmark and Share

Fujifilm X-Pro2 Review

Gallery (110 images): Fujifilm X-Pro2 Review Gallery

May 8, 2016: This very long review is finally complete! Enjoy...

I have now had my own Fujifilm X-Pro2 for just over a month, and by and large, I absolutely love the camera. Above is a link to a random sampling of images I've shot since getting the X-Pro2. There is a lot that is new and improved in comparison to the older Fujifilm bodies like my X-E2 and I will attempt to cover the major improvements. While I have now shot quite a lot with the X-Pro2, what I still haven’t done is a full-blown comparison to my X-E2 with respect to image quality. Suffice to say for now that my impressions are that it is as good, or better, in essentially every way. The increased megapixels have had no negative impact, and only contribute to its overall image quality.

This is also very true of raw files processed through the latest versions of Adobe's Creative Cloud Lightroom and Photoshop. With Adobe's tweaks to X-Trans sensor raw file processing, and the X-Pro2's increased resolution, I am actually finding quite acceptable results and generally don't feel the need to process images through a third party raw converter any more, converters like PhotoNinja or Iridient Developer. For a working pro that is using Fujifilm gear, shoots raw, and uses Adobe software, this can pay big dividends in productivity! Rest assured that the camera's JPEGs are still as good as ever.

Scattered throughout this review are some shots of the X-Pro2, side by side with my X-E2, so you can see how the controls have changed, the size differences etc. Apologies, but I had a very poor quality screen protector on the X-Pro2's rear LCD for those shots, and I've since then replaced it with a much nicer one. The full-resolution images, taken with the X-Pro2 in this review, were all raw files that were just processed through Lightroom CC.

Saturday, April 9, 2016

Bookmark and Share

Beau Photo / Fuji Guys Photo Walk - Coal Harbour

Last Saturday was an absolutely gorgeous day, perfect for another Fuji Photo walk! We had nearly 30 people attending our outing at Coal Harbour in Vancouver. What made the day memorable was warm sun, clear blue skies and lots of enthusiastic photographers, many already with Fujifilm gear, but a few with other systems who were hoping to try out Fuji X-system gear.

Beau Photo sponsored the event by, firstly, sending me (haha!), but also by providing two $150 rental coupons that people can use towards further testing of Fujifilm bodies and/or lenses. Everyone who attended received a Beau/Fuji ballpoint pen, a Fujifilm X-system T-Shirt and Fujifilm also provided a few more prizes, including a travel mug and a few X-T1 bodies... oh ahem, pardon me, they were USB sticks disguised as miniature X-T1 bodies. Still, very cool for all those who attended this free event!

Above is a link to a gallery of images I shot during the day with my X-Pro2, with large 4000 pixel wide files available to download, in order to better check out the excellent quality of Fujifilm's lenses. All photos were processed fully in the latest version of Adobe Lightroom CC (2015.5 release with Camera Raw 9.5). I have found that the latest Adobe software is really working quite well with the higher megapixel sensor in the X-Pro2 and I suspect that only rarely, and mainly if making really large prints, would you see a substantial benefit from using a different raw converter like Photo Ninja or Iridient Developer. I will explore this a little more in the full X-Pro2 review I'm working on, one that, for a variety of reasons, is taking longer than anticipated...